Wall-Box 22 kW [Mode 3 Charging Station]

Wall-Box 22 kW is a simple, low-cost, easy to install Mode 3 fast-charge EV Charging Station offering a 32amp IEC62196 (Type 2) 3-phase socket, designed specifically for charging electric vehicles at home and at workplace.

Wall-Box 22 kW unit has the following Performance Specification:

• Easy to install / low maintenance
• Designed to be permanently located outdoors or indoors
• CE approved Type 2 IEC62196 charging socket with hatch lock
• Mode 3 IEC61851-1 compliant communication protocol
• Full overload and fault current protection
• Multiple supply cable entry points 
• Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
• Glow wire rating tested to IEC60695-2-13
• BSI certificated to BS EN 60335-1 for safe use in the home
• Manufactured in compliance with BS7671 wiring regulations
• Compliant with IET EV regulations
• Corrosion resistant
• UV stabilised
• BS EN 60529 : IP65 category 1 certification (weatherproof)
• Made in UK

Type A 30mA RCBO protection is included and it will have to be installed remotely by your electrician (there is no more space inside the charging station).

Wall-Box 22 kW is ideally situated to provide safe & fast EV Charging within the following locations:

• Offices
• Factories
• Warehouses
• Car parks
• Hotels
• Restaurants
• Sporting venues
• Showrooms
• Retail Centres

The Charging Station is delivered fully assembled and tested; it is easy to install and every electrician is able to mount it and connect it.  

This product is Renault ZE Ready 1.2 Tested and Accredited and Nissan Charging Compatible:

This product is the best choice to charge all Mode 3 Electric Vehicles (thanks to the Type 2 charging socket, every EV is able to plug with its Mode 3 charging cable).