Home Charger T1 7.4 kW DUAL [Mode 3 Charging Station]
Mode 3 / Type 1 (SAE J1772) 5m tethered lead
Current: 16A / 32A (selectable with keyswitch)
230V AC (1-phase), 3,7 kW / 7,4 kW
By buying this product you can collect up to 78 loyalty points. Your cart will total 78 points that can be converted into a voucher of 39,00 €.
Customer ratings and reviews
Home Charger T1 7,4 kW DUAL is a simple, low-cost, easy to install Mode 3 fast-charge EV Charging Station offering a 16amp/32amp J1772 (Type 1) 5 Metre tethered lead, designed specifically for charging electric vehicles at home and at workplace.
Home Charger T1 7.4 kW DUAL unit has the following Performance Specification:
- Easy to install / low maintenance
- Designed to be permanently located outdoors or indoors
- CE approved J1772 charging gun complete with 5m tethered lead
- Secure charging gun holster
- High quality flexible charging cable
- Cable management system
- Mode 3 IEC61851-1 compliant communication protocol
- Key switch 16amp / 32amp
- A built-in 32amp RCBO accessible via an IP65 rated access door (with key lock)
- Full overload and fault current protection
- Multiple supply cable entry points
- Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
- Glow wire rating tested to IEC60695-2-13
- BSI certificated to BS EN 60335-1 for safe use in the home
- Manufactured in compliance with BS7671 wiring regulations
- Compliant with IET EV regulations
- Corrosion resistant
- UV stabilised
- BS EN 60529 : IP65 category 1 certification (weatherproof)
- Made in UK
The Charging Station is delivered fully assembled and tested; it is easy to install and every electrician is able to mount it and connect it.
This product is Renault ZE Ready 1.2 Tested and Accredited and Nissan Charging Compatible:
Available optional:
- Built-in Class 1 kWh meter MID approved (+ € 70 VAT excl.)
This product is the best choice to charge these electric cars:
Charging Mode | Mode 3 - IEC61851 |
Rated Current | 32 Amp |
Adjustable Charging Current | 16, 32 Amp |
Voltage | 230V (1-phase) |
Max. Charging Power | Up to 7,4 kW |
Charging Coupler (Vehicle Side) | Type 1 / SAE J1772-2009 |
Integrated Protection | Type A 30mA RCBO (residual-current circuit breaker with overload protection) |
Cable length (Vehicle Side) | 5 m |
Weight | 4,4 kg. |
Dimensions (H x W x D) | 37 x 18 x 14 cm. |
LED Indication | Charging Status, Fault Indication |
Operating Temperature | - 30 °C ... + 50 °C |
Degree of Protection | IP65 (weatherproof) |
Sehr empfehlenswert!
Sehr schnelle Abwicklung, sehr freundlicher Kundenservice!
Gerät hochwertig verarbeitet und stabil, vom Elektriker problemlos zu installieren und funktioniert prima!