Home Charger T1 7.4 kW [Mode 3 Charging Station]
Mode 3 / Type 1 (SAE J1772) 5m tethered lead
Current: 32A
230V AC (1-phase), max 7,4 kW
By buying this product you can collect up to 71 loyalty points. Your cart will total 71 points that can be converted into a voucher of 35,50 €.
Customer ratings and reviews
Home Charger T1 7,4 kW is a simple, low-cost, easy to install Mode 3 fast-charge EV Charging Station offering a 32amp J1772 (Type 1) 5 Metre tethered lead, designed specifically for charging electric vehicles at home and at workplace.
Home Charger T1 7.4 kW unit has the following Performance Specification:
- Easy to install / low maintenance
- Designed to be permanently located outdoors or indoors
- CE approved J1772 charging gun complete with 5m tethered lead
- Secure charging gun holster
- High quality flexible charging cable
- Cable management system
- Mode 3 IEC61851-1 compliant communication protocol
- A built-in 32amp RCBO accessible via an IP65 rated access door (with key lock)
- Full overload and fault current protection
- Multiple supply cable entry points
- Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
- Glow wire rating tested to IEC60695-2-13
- BSI certificated to BS EN 60335-1 for safe use in the home
- Manufactured in compliance with BS7671 wiring regulations
- Compliant with IET EV regulations
- Corrosion resistant
- UV stabilised
- BS EN 60529 : IP65 category 1 certification (weatherproof)
- Made in UK
The Charging Station is delivered fully assembled and tested; it is easy to install and every electrician is able to mount it and connect it.
This product is Renault ZE Ready 1.2 Tested and Accredited and Nissan Charging Compatible:
Available optional:
- Built-in Class 1 kWh meter MID approved (+ € 70 VAT excl.)
This product is the best choice to charge these electric cars:
Ford Focus Electric | Charging Mode | Mode 3 - IEC61851 |
| Rated Current | 32 Amp |
| Voltage | 230V (1-phase) |
| Max. Charging Power | Up to 7,4 kW |
| Charging Coupler (Vehicle Side) | Type 1 / SAE J1772-2009 |
| Integrated Protection | Type A 30mA RCBO (residual-current circuit breaker with overload protection) |
| Cable length (Vehicle Side) | 5 m |
| Weight | 4,4 kg. |
| Dimensions (H x W x D) | 37 x 18 x 14 cm. |
| LED Indication | Charging Status, Fault Indication |
| Operating Temperature | - 30 °C ... + 50 °C |
| Degree of Protection | IP65 (weatherproof) |
![EVR1 - Type 1 - max 7,4 kW [Portable charging station]](https://www.e-station-store.com/154-home_default/evr1-type-1-max-74-kw-portable-charging-station.jpg)
![EVR1 - Type 1 - max 3,7 kW [Portable charging station]](https://www.e-station-store.com/153-home_default/evr1-type-1-max-37-kw-portable-charging-station.jpg)
![Home Charger T1 3.7 kW [Mode 3 Charging Station]](https://www.e-station-store.com/167-home_default/home-charger-t1-37-kw-mode-3-charging-station.jpg)
![Home Charger T1 7.4 kW DUAL [Mode 3 Charging Station]](https://www.e-station-store.com/251-home_default/home-charger-t1-74-kw-dual-mode-3-charging-station.jpg)
![Home Charger T1 3.7 kW [Mode 3 Charging Station]](https://www.e-station-store.com/167-medium_default/home-charger-t1-37-kw-mode-3-charging-station.jpg)
![Home Charger T2 3.7 kW [Mode 3 Charging Station]](https://www.e-station-store.com/192-medium_default/home-charger-t2-37-kw-mode-3-charging-station.jpg)
Raccordement
L'emplacement de pénétration du câble d'alimentation n'est pas décrit et la notice sans schéma est en italien et en anglais. je vais devoir improviser.